Optimization of in-vacuo template-stripped Pt surfaces via UHV STM

A recently demonstrated [1] in-vacuo template-stripping process is applied to the study of platinum films stripped from ultra-flat silicon-oxide surfaces. Template-stripped (TS) Pt surfaces, prepared with a range of post-deposition annealing times prior to being stripped from the templating surface in an ultra-high vacuum (UHV) environment, are examined by UHV scanning tunneling microscopy (STM). These studies reveal that without post-deposition annealing, TS Pt surfaces are largely made up of poorly-ordered, granular nanostructures undesirable for many applications. The post-deposition annealing treatments explored in the study result in the emergence and continuous growth of large smooth crystallites. Issues with crystallite orientation relative to the TS surface and artefacts arising as a result of the epoxy used in the template-stripping process are presented and discussed in relation to optimizing the template-stripping procedure for specific applications such as self-assembled monolayer (SAM) formation for molecular electronics. PACS 68.37.Ef; 68.47.De; 68.55.Jk; 81.05.Bx; 81.15.Ef     

Performance evaluation of fiber Bragg grating sensors by digital holographic technique, strain gauge measurement

In view of the growing interest for non-destructive tests of materials, geodynamical monitoring and in general remote sensing, there is a great effort to bring practical optical sensors from research labs to industrial and environmental applications. In this paper, we employ digital holographic technique as an efficient tool for evaluating the strain measurement capability of fiber Bragg gratings (FBG). A cantilever beam has been employed as a test structure under loading test. The strain measurements results obtained by fiber-based sensors have been compared to those obtained by using full-field digital holographic technique and point-wise strain gauge sensors glued on the same cantilever beam. A simple theoretical model is also presented to interpret and compare the experimental results coming from different techniques.     

Influence of organic modifiers on morphology and crystallization of poly(ϵ‐caprolactone)/synthetic clay intercalated nanocomposites

ε‐caprolactone was polymerized in the presence of neat montmorillonite or organomontmorillonites to obtain a variety of poly(ε‐caprolactone) (PCL)‐based systems loaded with 10 wt % of the silicates. The materials were thoroughly investigated by different X‐ray scattering techniques to determine factors affecting structure of the systems. For one of the nanocomposites it was found that varying the temperature in the range corresponding to crystallization of PCL causes reversible changes in the interlayer distance of the organoclay. Extensive experimental and literature studies on this phenomenon provided clues indicating that this effect might be a result of two‐dimensional ordering of PCL chains inside the galleries of the silicate. Small angle X‐ray scattering and wide angle X‐ray scattering investigation of filaments oriented above melting point of PCL revealed that polymer lamellae were oriented perpendicularly to particles of unmodified silicate, while in PCL/organoclay systems they were found parallel to clay tactoids. Calorimetric and microscopic studies shown that clay particles are effective nucleating agents. In the nanocomposites, PCL crystallized 20‐fold faster than in the neat polymer. The crystallization rate in nanocomposites was also significantly higher than in microcomposite. Further research provided an insight how the presence of the filler affects crystalline fraction and spherulitic structure of the polymer matrix in the investigated systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2350–2367, 2007     

Unified approach to photo-and electro-production of mesons with arbitrary spins

A new approach to identify the independent amplitudes along with their partial wave multipole expansions, for photo-and electro-production is suggested, which is generally applicable to mesons with arbitrary spin-parity. These amplitudes facilitate direct identification of different resonance contributions.      

Determination of electron temperature based on a semicoronal model in Hall accelerator plasma flows

We present the results of a spectroscopic study of a nonequilibrium plasma in a Hall accelerator, in particular for such an important parameter as the electron temperature. For the studied conditions, we used the semicoronal equilibrium model, which relates the intensity ratios for two successive ionization steps for the same element. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 1, pp. 93–96, January–February, 2007.     

Mineralogical analysis of auriferous ores from the El Diamante mine, Colombia

X-ray diffraction (XRD), Mössbauer spectrometry (MS), secondary ions mass spectroscopy (SIMS) and laser-ablation microprobe–inductively coupled plasma–mass spectrometry (LAM–ICP–MS) were used to study mineral samples of Colombian auriferous ores collected from the “El Diamante” mine, located in the municipality of Guachavez-Nariño, in Colombia. The samples were prepared as polished thin sections and polished sections. From XRD data, quartz, sphalerite and pyrite were detected and their respective cell parameters were estimated. From MS analyses, pyrite, arsenopyrite and chalcopyrite were identified; their respective hyperfine parameters and respective texture were deduced. Multiple regions of approximately 200 × 200 μm in each sample were analyzed with SIMS; the occurrence of “invisible gold” associated mainly with pyrite and secondarily with arsenopyrite could thus be assigned. It was also found that pyrite is of the arsenious type. Spots from 30 to 40 μm in diameter were analyzed with LAM–ICP–MS for pyrite, arsenopyrite and sphalerite; Au is “homogeneously” distributed inside the structure of the arsenious pyrite and the arsenopyrite (not as inclusions); the chemical composition indicates similarities of this “invisible gold”, forming a solid solution with arsenious pyrite and arsenopyrite. One hundred nineteen and 62 ppm of ‘invisible gold’ was quantified in 21 spots analyzed on pyrite and in 14 spots on arsenopyrite, respectively.     

Ammonium violurate: a compact structure with extensive hydrogen bonding in three dimensions

The title compound [systematic name: ammonium pyrimidine‐2,4‐5,6(1H,3H)‐tetrone 5‐oximate], NH₄⁺·C₄H₂N₃O₄⁻, crystallizes from water in the triclinic space group P and is ismorphous with a known rubidium complex [Gillier (1965). Bull. Soc. Chim. Fr. pp. 2373–2384]. The principal feature of the structure is hydrogen bonding; each ammonium H atom acts as a bifurcated donor and three of the four violurate O atoms are bifurcated acceptors, with the fourth acting as a trifurcated acceptor. The pattern of hydrogen bonding around the cation is very similar to the rubidium coordination environment in the related structure. The violurate anions pack as hydrogen‐bonded crinkled tapes, which are linked and separated by the ammonium cations to give a compact three‐dimensional structure.     

Tetrakis(1‐naphthylamino)silane and its tetrahydrofuran trisolvate

In both title structures, C₄₀H₃₂N₄Si and C₄₀H₃₂N₄Si·3C₄H₈O, the angles around the Si atom deviate significantly from the tetrahedral value [104.34 (7)–116.63 (7)° in the nonsolvate and 99.91 (15)–116.85 (15)° in the solvate]. The amino H atoms in the solvated structure are involved in hydrogen bonding with two of the tetrahydrofuran solvent molecules.     

Phase liquid-crystalline transitions in hydroxypropylcellulose-ethanol and hydroxypropylcellulose-acetic acid systems under deformation

The phase transitions and phase state of hydroxypropylcellulose mixtures with ethanol and acetic acid under static conditions and in the shear field have been studied by the turbidity-point method and polarization microscopy with the use of a polarization-photoelectric setup and a modified plastoviscometer. The deformation of solutions leads to a decrease in the temperature of mesomorphic phase formation and to a change in the type of liquid crystals from cholesteric to nematic.